Carlex AG ka - Carlex AG ka

ProFoss™ poultry MDM

Last year of production: 6/30/2021

Last year of spare parts and support: 6/30/2028

100% control of your poultry MDM production. The ProFoss™ in-line poultry MDM analysis solution gives you continuous measurements allowing you to make real-time adjustments to meet fat targets in each batch.

Teaser: ProFossTM is a continuous in-line analyser for poultry MDM production

What can you analyse: Poultry MDM

Where can you analyse: In-line, directly in the pipe

Parameters: Fat, Moisture & Protein

Analysis time: Less than 60 sec.

Principle: NIR lateral transmittance

Value

Produce closer to target specifications. Increase yield. Reduce customer claims. Reduce or eliminate downgrade.

Sample type

Poultry MDM

Parameters

Fat, Protein & Moisture

Learn how MDM in-line analysis can increase efficiency and product quality

As Fat, Protein and Moisture levels can vary greatly depending on the raw material, rate of input and operator controls, the ProFoss™ in-line analyser is helping producers to get closer to their specification and saving thousands! See how in this three minute video.

Features

Trend analysis

ProFoss™ takes direct measurements inside the process. Sampling errors and sample preparation errors can therefore be minimised to almost zero.
Dedicated sample interface

• Lateral transmission probe installed directly in the pipe
• True in-line – no bypass – no waste
• No moving parts
• No hygiene compromises
FossConnect™

FossConnect™ is a centralised networking management solution for ProFoss™ that helps you reduce your production costs and secure the quality of your products. With FossConnect™, you can manage, configure and monitor your instruments remotely from any internet-enabled computer and safeguard your data for whenever you need it.

Brochures and Papers

Technical specification

**ProFoss Transmittance**
Analysis time	5 ms – 60 sec / integration time; Average time per result 3 – 15 seconds
Measurement mode	Transmittance (Lateral transmittance, transmittance probe pair)
Wavelength range	850 – 1050 nm
Detector	Si Diode array
Spectral dispersion	1.0 nm / pixel
General
Light source lifetime	Dual lamp system = 17500 h
Software package	ISIscan™ for instrument control; ISIcal™ for calibration development
Wavelength accuracy	0.5 nm
Wavelength precision	< 0.02 nm
Wavelength stability	< 0.01 nm/°C
Noise	< 60 micro AU
Random Vibrations	0.4 grms at 10 – 150 Hz according to IEC 60068-2-64 0.4 grms at 10 – 1250 Hz according to FOSS internal standard (more information available on request)
Temperature	-5 – 40°C (23 – 104°F). With purge -5 – 65°C (23 – 149°F)
Installation in ATEX zone	0 – 40°C (32 – 104°F). With purge 0 – 65°C (32 – 149°F)
Purge air	Flow rate minimum 5 l/min, > 99.9% water free, > 99.9% free of oil and fine particles down to 0.3µm
Ambient humidity	10 – 90 % relative
Dimensions	(w × h × d): 42 × 42 × 13.5 cm (16.5 × 16.5 × 5.3 inches) + brackets to hold the unit
Weight	25 kg / 55 lbs
Cabinet	1.5 mm (lid 2.5mm) Stainless Steel EN 1.4301 (SS2333)
Protection	IP69K according to IEC 60529 and DIN 40050 part 9, NT ELEC 023
Communication	Ethernet, OPC “4 - 20 mA, Profibus, RINA
Power supply	Recommended isolated or conditioned line power 100 – 240 VAC, 50 – 60 Hz, 2.0 A, 150W

CARLEX EXPORT AG works in your country

ProFoss™ poultry MDM

Last year of production: 6/30/2021

Last year of spare parts and support: 6/30/2028

100% control of your poultry MDM production. The ProFoss™ in-line poultry MDM analysis solution gives you continuous measurements allowing you to make real-time adjustments to meet fat targets in each batch.

Value

Sample type

Parameters

Learn how MDM in-line analysis can increase efficiency and product quality

Features

Trend analysis

Dedicated sample interface

FossConnect™

Brochures and Papers

Meat Segment Brochure

ProFoss™ Poultry Brochure

Technical specification

Office

Office

Sales

Service

Office

Sales

Service

Office

Sales

Service

Office

Office

Office

Office

Office

Office

Office

	Azerbaijan Mr. Bahram Atabeyli
http://caucasusconsulting.org/

	Switzerland Matthias Schulz
https://carlex-ag.com/web/CH/

	Ukraine Alex Filonenko
https://altima.plus/

	Moldova Carmen Iacob
https://carlex-ag.com/web/RO/

	Kazahkstan Alex Romaniko
http://carlex.kz/